Issue with phone cell gsm trigger after update to v1.20

Post your questions and help other users.

Moderator: Martin

Post Reply
fatal
Posts: 5
Joined: 21 Dec 2013 21:16

Issue with phone cell gsm trigger after update to v1.20

Post by fatal » 21 Dec 2013 21:27

Hi,

Since I've updated to automagic to v1.20 on play store (previously I was using playstore version 1.19) Phone Cell GSM Trigger doesn't work when the phone's is in sleep mode, it only runs when I turn on the screen. I know there are some roms (maybe even the stock one?) where it's the normal way, but it was working in 1.19. Could you fix this issue?

My device is a Nexus 4 with CM11.

User avatar
Martin
Posts: 4468
Joined: 09 Nov 2012 14:23

Re: Issue with phone cell gsm trigger after update to v1.20

Post by Martin » 22 Dec 2013 09:09

Hi,

Did you also update the ROM at about the same time or only Automagic?
Are you using the option Wake device every: Xm?

Regards,
Martin

fatal
Posts: 5
Joined: 21 Dec 2013 21:16

Re: Issue with phone cell gsm trigger after update to v1.20

Post by fatal » 22 Dec 2013 12:31

Martin wrote:Hi,

Did you also update the ROM at about the same time or only Automagic?
Are you using the option Wake device every: Xm?

Regards,
Martin
Hi,

No, I didn't touch the rom, that's why i'm almost sure, it's an automagic bug.

No, that option is turned off.

User avatar
Martin
Posts: 4468
Joined: 09 Nov 2012 14:23

Re: Issue with phone cell gsm trigger after update to v1.20

Post by Martin » 22 Dec 2013 15:10

Hi,

Does the trigger work when the wake device option is enabled?
There was no change in Automagic in this particular area that would explain this change in behavior.
Did you uninstall or update any other apps at about the same time or did you change some settings of the phone at the time it stopped working (for example location settings, synchronization settings)? Are the Google apps (especially Google play services) installed?
I will try to reproduce this problem on a Nexus 4 with CM11.

Regards,
Martin

fatal
Posts: 5
Joined: 21 Dec 2013 21:16

Re: Issue with phone cell gsm trigger after update to v1.20

Post by fatal » 22 Dec 2013 17:38

Martin wrote:Hi,

Does the trigger work when the wake device option is enabled?
There was no change in Automagic in this particular area that would explain this change in behavior.
Did you uninstall or update any other apps at about the same time or did you change some settings of the phone at the time it stopped working (for example location settings, synchronization settings)? Are the Google apps (especially Google play services) installed?
I will try to reproduce this problem on a Nexus 4 with CM11.

Regards,
Martin
I don't know, I will enable it and will report later. As far as I remember, no other apps was updated. Gapps is intalled. I didn't touch neather location, nor synchronization settings, didn't change anything.

fatal
Posts: 5
Joined: 21 Dec 2013 21:16

Re: Issue with phone cell gsm trigger after update to v1.20

Post by fatal » 23 Dec 2013 19:40

Unfortunately wake device after 5 minutes option didn't help. But I saw on my phone about, that I'm using the old (JB) baseband on my phone, and the rom was KRT16S. I'll update to the latest radio, and KOT49H (4.4.2) and will report later.

User avatar
Martin
Posts: 4468
Joined: 09 Nov 2012 14:23

Re: Issue with phone cell gsm trigger after update to v1.20

Post by Martin » 24 Dec 2013 14:17

Hi,

I've tried to reproduce this issue on a Nexus 4 with CM 11 but have not yet found a difference between versions 1.19 and 1.20.
I observed that this device updates the cell information only when the device is active (caused either by Automagic or another app). Turning the screen on updates the cell info immediately, waking the device with option 'Wake device every N minutes' did not help when everything else is disabled (location, mobile data, screen off).

I assume that there was an app running in the background that either used mobile data (for example a periodic calendar sync) or an app requested location updates which caused the device to update the cell information.

Creating mobile data traffic was quite a reliable method to update the cell info when the display is off.
Example flow:
-trigger Periodic Timer: every N minutes
-action HTTP Request: GET http://www.google.com/

Another method that worked was to create a flow with a trigger Location (no actions required). This caused the device to update the cell information every few minutes.

Is one of the above methods also working on your device?

Regards,
Martin

fatal
Posts: 5
Joined: 21 Dec 2013 21:16

Re: Issue with phone cell gsm trigger after update to v1.20

Post by fatal » 29 Dec 2013 21:11

I've updated my rom and the radio and it seems the issue is gone. Thanks to your fast answer to the report (which was wrong, sorry about that).

Thanks for the app, worth every penny :)

User avatar
Martin
Posts: 4468
Joined: 09 Nov 2012 14:23

Re: Issue with phone cell gsm trigger after update to v1.20

Post by Martin » 30 Dec 2013 12:44

No problem, I'm glad it's working now :-)

Thanks
Martin

Post Reply