Automagic Forum

On my tablet, it goes to sleep and I have to tap and drag the unlock icon to open the system, I've had a look at the commands and am assuming I need to run a root command to tap and drag, but am unsure what the command will look like?

I was using AutoInput, and have ditched that in favour of the root input tap command - it's so much easier to use!

There is a similiar topic on this. viewtopic.php?f=4&t=1705

You need to enable automagic device administrator function first. Then try to use Action : Dismiss Slide to Unlock Keyguard. Don't know if it works at your phone. It is working at mine.

The other way around is to use Action : Set Keyguard state to off, turn on the screen. Then after you finish, use another action (or seperate flow) to turn on the keyguard state again. (And additional action : lock device)

Try to play with control UI to do some simple task. If you have ever use autoinput before, you will love the flexibility of Control UI. It is the feature that made me fall in love with automagic.

Ok, will do buddy, I wish there were more examples of very simple flows of each action to fully understand the power potential

Yeah, automagic lack tutorials. The ones available at youtube is not enough to compete with tasker. For example of flow, you can check at flow sharing. Try to import and see how they accomplish something. I never share my flow yet at there, but when I do, I wanna show the complete tutorial of integrating automagic with eventghost at windows.

I used Turn screen on (10s) and then Dismiss slide to unlock - works brilliantly!

Thankyou

I have a OnePlus5 running Lineage OS/Android 9.

I tried the suggestions in this thread but haven't got unlock to work (I unlock my phone by drawing a pattern)

Any other suggestions?

P.S. I'm running 1.31 because I no longer have GAPPS/Google Play to update. I can buy another license, get 1.37 and side load it if needed.

Thanks,
Mark

Set Keyguard state seems not working anymore since oreo. Try Set Lock Pattern State instead, the rest of the concept is still similar; disable lock pattern, turn on screen and enable lock pattern again.