Automagic Running, but doesn't consistently execute flows ... until opening app
Posted: 19 Apr 2019 18:12
Samsung Galaxy S8+ on Verizon. Automagic version 1.37.0. Phone recently update to Android P
Automagic has worked flawlessly in the past. I looked for similar issues in the fourm but couldn't find anything. Here are the details.
- Flow to check location every 5 minutes
- When entering "work location", change ringer mode to vibrate
- Another flow to check location every 5 minutes
- When leaving "work location", changes ringer mode to normal
- Also, have another flow that turns ringer off at 11pm and another flow to turn ringer back to normal at 7am.
This has previously worked fine with no issues. Currently, it works most of the times (>75%), but occassionally it doesn't execute. Here is what I notice.
- After entering work location, I notice after 10 minutes that my ringer is still on.
- I assume that my location isn't quite right, so I swipe down on the screen and see "Automagic Service is Running" and click Automagic Premium.
- IMMEDIATELY all of the Automagic flows run (they all go red) and everything sets correctly.
Another example is at 11:30pm. The flow to turn off the ringer at 11pm should have run ... but it didn't. Swipe down on the screen, open Automagic and VOILA, all the flows run and set everything accordingly.
Any help?
Thanks,
Automagic has worked flawlessly in the past. I looked for similar issues in the fourm but couldn't find anything. Here are the details.
- Flow to check location every 5 minutes
- When entering "work location", change ringer mode to vibrate
- Another flow to check location every 5 minutes
- When leaving "work location", changes ringer mode to normal
- Also, have another flow that turns ringer off at 11pm and another flow to turn ringer back to normal at 7am.
This has previously worked fine with no issues. Currently, it works most of the times (>75%), but occassionally it doesn't execute. Here is what I notice.
- After entering work location, I notice after 10 minutes that my ringer is still on.
- I assume that my location isn't quite right, so I swipe down on the screen and see "Automagic Service is Running" and click Automagic Premium.
- IMMEDIATELY all of the Automagic flows run (they all go red) and everything sets correctly.
Another example is at 11:30pm. The flow to turn off the ringer at 11pm should have run ... but it didn't. Swipe down on the screen, open Automagic and VOILA, all the flows run and set everything accordingly.
Any help?
Thanks,